Simons Voss Technologies Palm LDB Version 1.40 Spécifications télécharger pdf (Page 8)

Smart Relay: SREL, SREL.ZK, SREL.ADV

Page 8

5.0 Installation

 Switch off the supply voltage (if necessary, pull out the plug or disconnect the

battery).

 Connect all cables to the terminals provided on the Smart Relay (see Connec-

tion Assignments on the following page)

If you are connecting a direct current power supply, make sure that you

get the polarity right.

 You can attain the largest reader range if you align the Smart Relay antennas

so that they are parallel to that on the transponder during the installation.

 Switch on the supply voltage (if necessary, insert the plug or connect the

battery).

 Verify the function of the Smart Relay with a transponder in the condition as

received from the factory.

 Program the Smart Relay with the SimonsVoss software (we recommend

software version LDB.EXE 1.40 or later).

 Use a transponder that is now authorised in order to test the functioning of the

Smart Relay again.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 20 21

Pas de commentaire

Simons Voss Technologies Palm LDB Version 1.40 Spécifications Page 8